FiberHome AN5516-04, Quick Installation Manual

Page: 27 / 36

Connected to the oppo
16
Connecting the Network Cable
Subrack Side (RJ-45) Interface
HSUB/HSUC card ETH
TIMA card 1000MASK_TX
HSUB/HSUC card BITS/TOD
Connection
1
2
Lead the network cable through the wiring hole
wiring channel on the side of the cabinet.
Insert the RJ-45 connector into the correspond
Lead the network cable through the fiber passa
1
2
3
3
23
Caution
Ensure that the network cable and other cable
connector and the nearest banding point, so t
and that the cable can be easily plugged or un
osite end equipment
Opposite End (RJ-45)
Connected to the UNM2000 computer .
Connected to the opposite end equipment .
Connected to the BITS/TOD external clock source.
e on the cabinet top, and route it downward along the
ding Ethernet interface of the card.
age unit, and route it to the corresponding card.
3
es have a proper surplus in the section between the
hat stress will not be produced at the connector
nplugged.