FiberHome AN5516-04, Quick Installation Manual

Page: 16 / 36

8
Installing Cards and Components
8.1
Installing Cards
Caution
 Before installing a card, check the pin and
the backplane.
 Follow the rules for installing cards.
 If resistance is encountered when you are
out the card and check whether the card d
type are correct. Do not force in a card in s
 Apply dummy panels to the slots not holdin
procedures for installing the dummy panels
Open the latches, align the left
and right edges of the card with
the slide rails in the slot (with the
component side of the card
facing upward) and push the
card in along the slide rails
slowly.
Push t
and cl
card’s
the fig
procedures for installing the dummy panels
those for installing common cards.
1 2
8.2
Installing the Fan Unit
Caution

Do not operate forcefully; especially do n
excessive force when installing the fan u
 Do not touch the fan blades when the fan
running.
1 12
Hold the fan unit and align the slide rails on t
upper and lower sides of the fan unit with the
rail grooves for the fan unit on the subrack
respectively.
Push the fan unit slowly into the subrack unt
completely inserted and locked into the back
socket of the subrack.
1
2
M3
Captive
screw
ESD protection gloves /
wrist strap
Cross
screwdriver
d card connector on
plugging a card, pull
irection, slot, and card
such a case.
ng cards. The
s are the same as
the card to its position,
ose and secure the
latches as shown in
ure below.
Tighten the
captive screws on
the card panel to
lock the card.
s are the same as
3
ESD protection gloves
wrist strap
not exert
nit.
n unit is
2 2
he
e slide
il it is
kplane