background image

27

10: confIGuratIon

64.

Analog inputs - periodical reports

This parameter defines reporting period of analog inputs value. 

Periodical reports are independent from changes in value (param-

eter 63). Parameter is relevant only for analog inputs (parameter 

20 or 21 set to 4 or 5).

Parameter size

2B

Default value

0 (periodical reports disabled)

Available 

 

values

0 – periodical reports disabled
60-32400 (60s-9h)

65.

Internal temperature sensor - minimal change to 

report

This parameter defines minimal change (from the last reported) 

of internal temperature sensor value that results in sending new 

report. 

Parameter size

2B

Default value

5 (0.5°C)

Available 

 

values

0 - reporting on change disabled
1-255 (0.1-25.5°C)

66.

Internal temperature sensor - periodical reports

This parameter defines reporting period of internal temperature 

sensor value. Periodical reports are independent from changes in 

value (parameter 65).

Parameter size

2B

Default value

0 (periodical reports disabled)

Available 

 

values

0 – periodical reports disabled
60-32400 (60s-9h)

67.

External sensors - minimal change to report

This parameter defines minimal change (from the last reported) of 

external sensors values (DS18B20 or DHT22) that results in send-

ing new report. Parameter is relevant only for connected DS18B20 

or DHT22 sensors.

Parameter size

2B

Default value

5 (0.5 units)

Available 

 

values

0 - reporting on change disabled
1-255 (0.1-25.5 units, 0.1)

Summary of Contents for SMART IMPLANT FGBS-222







































Reviews: