35
11: Z-WaVe specIfIcatIon
Notification Command Class:
The device uses Notification Command Class to report different
events to the controller (“Lifeline” group).
ROOT (Endpoint 1)
Notification Type
Event
Home Security [0x07]
Intrusion Unknown Location [0x02]
Endpoint 2
Notification Type
Event
Home Security [0x07]
Intrusion Unknown Location [0x02]
Endpoint 7
Notification Type
Event
Event /State
Parameter
System [0x09]
System hardware failure
with manufacturer proprie-
tary failure code [0x03]
Device Overheat
[0x01]
Endpoint 8-13
Notification Type
Event
System [0x09]
System hardware failure [0x01]
Protection CC:
Protection Command Class allows to prevent local or remote control
of the outputs.
Type State
Description
Hint
Local
0
Unprotected - The device is not
protected, and may be operated
normally via the user interface.
Inputs connected
with outputs.
Local
2
No operation possible – state of
output cannot be changed by the
B-button or corresponding Input
Inputs discon-
nected from
outputs.
RF
0
Unprotected - The device accept
and respond to all RF Commands.
Outputs can be
controlled via
Z-Wave.
RF
1
No RF control – command class
basic and switch binary are reject-
ed, every other command class
will be handled
Outputs cannot
be controlled via
Z-Wave.
