13
4: InstallatIon
4.8: Connection with button
You can connect monostable or bistable switches to IN1/IN2 termi-
nals to activate scenes.
1. Disconnect power.
2. Connect with the diagram below:
GND 9-30V
GND
IN1
IN2
P
1
2
Diagram 8: Example connection with 2 buttons
(1,2 – button)
3. Verify correctness of connection.
4. Power the device.
5. Add the device to the Z-Wave network.
6. Change values of parameters:
• Connected to IN1:
»
Monostable: change parameter 20 to 2
»
Bistable: change parameter 20 to 3
• Connected to IN2:
»
Monostable: change parameter 21 to 2
»
Bistable: change parameter 21 to 3
