Festo Smart cubic CPV-SC Series, Manual

Page: 7 / 80

Contents and general instructions
V
Festo P.BE-CPVSC-EN en 0112NH
Designated use
The CPV-SC valve terminals described in this documentation
have been designed exclusively for controlling pneumatic
actuators. They may only be used in conjunction with devices
and components recommended or approved of by Festo as
follows:
– in accordance with designated use
– in their original state
– without any modifications by the user
– in faultless technical condition.
The maximum values specified for pressures, temperatures,
electrical data, torques etc. must be observed.
Please comply with national and local safety laws and regula-
tions.
Target group
This manual is intended exclusively for technicians trained in
control and automation technology, who have experience in
fitting, installing, commissioning, servicing and converting
pneumatic components.
Service
Please consult your local Festo service centre if you have any
technical problems.