Festo Smart cubic CPV-SC Series, Manual

Page: 50 / 80

4. Commissioning
4-8
Festo P.BE-CPVSC-EN en 0112NH
Checking the valve-cylinder combination
Warning
Before checking the valve-cylinder combination:
– Make sure that nobody is in the danger zone.
Testing
Proceed as follows:
1. Switch on the compressed air supply.
2. Check the functioning and operation of each individual
valve-cylinder combination by actuating the manual over-
ride as shown in the following diagrams.
3. Make sure that all the valves are in their basic positions
before commissioning the valve terminal.
4. Switch off the compressed air supply after checking the
valves.