Festo Smart cubic CPV-SC Series, Manual

Page: 63 / 80

5. Maintenance and conversion
5-7
Festo P.BE-CPVSC-EN en 0112NH
Please note
When fitting the double-solenoid valve (Ident. code J), note
the correct position of the control and work valves.
– - The control valve must be on the left of the work valve.
You will then guarantee correct operation of the double-
solenoid valve.
2. If you wish to add a double-solenoid valve, you must re-
move two other components for each double-solenoid
valve.
3. Place the component on the tie rod. Press against the
component so that it snaps into position in the electric
circuit link.
Fig. 5/3: Fitting a component in a valve location
4. Align the CPV-SC valve terminal components on a flat sur-
face so that they are not offset.
5. Tighten the tie rods with 0.8 + 0.2 Nm.