CMMD-AS-C8-3A
Festo – GDCP-CMMD-AS-HW-EN – 1404NH – English
5
Instructions on this documentation
This documentation is intended to help you safely work with the motor controller CMMD-AS-C8-3A and
describes the functions, commissioning and error messages.
Target group
This documentation is intended exclusively for technicians trained in control and automation techno-
logy, who have experience in installation, commissioning, programming and diagnostics of positioning
systems.
Versions
This documentation refers to the following versions:
–
Motor controller CMMD-AS-C8-3A from Rev 02 (
Type plate).
Please note
Before using a newer firmware version, check whether a newer version of the FCT plug-
in or user documentation is available for it (
www.festo.com/sp).
servicing
Please consult your regional Festo contact if you have any technical problems.
Product identification
Rating plate CMMD-AS-C8-3A
Function
…
CMMD-AS-C8-3A
561406
CN98 P0021912
Rev 02
In: 1
k
(95…250) V AC
(50…60) Hz 8 A
Out 1/2:
3
k
(0…to Input Voltage) V AC
(0…1000) Hz 4 A
Type designation
CMMD-AS-C8-3A
Part number
e.g. 561406
Revision status
e.g. Rev 02
Serial number
e.g. CN98 P0021912
Input (In)
1-phase
95 … 250 V AC
50 … 60 Hz, 8 A
Output 1, 2 (Out 1/2)
3-phase
0 … Input voltage V AC
0 … 1000 Hz, 4 A
Tab. 1
Rating plate CMMD-AS-C8-3A (example)
Issue status of the specified standards
Standard: issue status
EN 60034-1:2010-10
EN 61800-3:2004-12 + A1:2012-03
EN 60204-1:2006/A1:2009-02
EN 61800-5-1:2007-09
Tab. 2
Issue statuses
