DSMI-...
Festo DSMI-... 0102NH English
40
11
Rectifying faults
Fault
Possible cause
Remedy
Uneven movement
of the moveable
Restrictors fitted
incorrectly
Check the restrictor functions
(supply or exhaust restriction)
mass
Asymmetrical
angle setting
Set preferably symmetrical
Hard metallic
knocking in the
end position
Excessive residual
energy
Select lower speed;
use stops with integrated shock
absorbers;
use external shock absorbers;
Drive shaft does
not remain in the
end position
use external shock absorbers;
only move against residual air cushion
on exhaust side;
Select smaller mass.
Fig. 39
12
Technical specifications
Type
DSMI-25-270
DSMI-40-270
Part no.
192270
192271
Design
With double-acting swivel vane
Medium
Filtered, lubricated or non-lubricated com-
pressed air (filter fineness min. 5
m
m)
Mounting position
As desired
Adjustable switching pressure
2 ... 10 bar
Swivel range
- single
Infinitely adjustable between 0 ... 272°
- with one [two] shock absorber(s) as per
“Accessories”
258° [246°]
255° [240°]
Summary of Contents for DSMI Series
Page 104: ...DSMI Festo DSMI 0102NH Italiano 104...
Page 130: ...DSMI Festo DSMI 0102NH 130...
Page 131: ...DSMI Festo DSMI 0102NH 131...
