DSMI-...
Festo DSMI-... 0102NH English
24
2
Method of operation and use
When compressed air is applied to the connections alternately, the inner vane
swings backwards and forwards in the housing. This swivel movement is trans-
ferred to the external stop lever and converted into a rotary movement on the drive
shaft. The rotary angle can be limited by adjustable stops for the stop lever.
The pneumatic swivel module type DSMI-... has been designed for rotating or
swiveling work loads which do not have to perform a complete revolution. The
integrated measuring system is intended for monitoring the swivel position (e.g.
for electronic control in conjunction with the Soft Stop SPC11).
3
Transport and storage
S
Take into account the weight of the
DSMI-... .
It weighs up to 3.2 kg.
4
Conditions of use
Electronic closed-loop operation of the DSMI-...:
Please note
Special conditions apply to electronic closed-loop operation of the DSMI-... .
S
Take into account the instructions in the manuals for type SPC... .
The following applies in all cases:
Please note
Malfunctioning can occur as a result of incorrect handling.
S
These general conditions for the correct and safe use of the product must be
observed at all times.
Fig. 2
Summary of Contents for DSMI Series
Page 104: ...DSMI Festo DSMI 0102NH Italiano 104...
Page 130: ...DSMI Festo DSMI 0102NH 130...
Page 131: ...DSMI Festo DSMI 0102NH 131...
