DGE−...−ZR−RF
Festo DGE−...−ZR−RF 0405a English
31
4
Con
d
ition
s
o
f
us
e
Ple
as
e note
Incorrect handling can lead to malfunctioning.
These general conditions for the correct and safe use of the product must be
observed at all times.
S
Compare the maximum values specified
with those of your application.
The maximum permitted values, e.g. for
pressures, forces, torques, masses,
speeds and temperatures must not be
exceeded.
S
Please observe the prevailing ambient
conditions.
Corrosive environments (e.g. ozone) reduce the service life of the axis.
When the unit is fitted in a vertical position:
W
a
rnin
g
If there is a power failure, the work mass will slide down.
Moving loads can cause injury to people or damage to property.
S
Make sure that the product is driven only by motors with an integrated
spring−loaded holding brake.
In this way you can prevent the work mass from sliding down (but not in the
event of a toothed belt fracture).
S
Please comply with national and local safety laws and regulations.
S
Remove all packaging.
The packaging is intended for recycling (except for oiled paper which must be
disposed of ).
Fig.6
