Festo DGE ZR-RF Series, Operating Instructions Manual

Page: 51 / 160

DGE−...−ZR−RF
Festo DGE−...−ZR−RF 0405a English
51
11 E limin a tin g fau lt s
F au lt Po ss ible caus e Reme d y
Positioning not
accurate Tooth overrun due to excessive
inertial forces reduce the dynamic loading,
new reference travel, if
necessary return to Festo
Toothed belt damaged Return product to Festo
Reference point switch loose or
switching cam loose Fasten
Outside the axis Check peripherals
(e.g. motor, controller, etc.)
Fastening of interface to workload
on the slide loose Fasten again as described in
the chapter Fitting"
Fastening of coupling loose Tighten the coupling
Play in roller guide Return product to Festo
Defective bearing of shafts etc.
Loud noises during
operation Roller guide damaged Return product to Festo
operation
Play in roller guide
Insufficient lubrication (of slide
bearing) Lubricate; if necessary
return product to Festo
Toothed belt damaged Return product to Festo
Outside the axis (e.g. drive
package including coupling or
external attachments) Check peripherals to make
sure that parts are in
contact with each other
Wear on drive shaft Return product to Festo