DGE−...−ZR−RF
Festo DGE−...−ZR−RF 0405a English
43
S
Place the safety limit switches in the
mechanical end positions (W).
At first the safety limit switches can still
be shifted in the longitudinal direction
(cable reserve; for accurate positioning
see chapter Commissioning").
S
Position the reference point switch
between both hardware limit switches
(accurate positioning: see chapter
Commissioning").
S
Avoid external influence caused by mag
netic or ferritic parts in the vicinity of the
reference point switch and the limit
switches.
In this way you can ensure that the
switches function faultlessly.
Avoiding dirt
S
Use cover rails in all unused grooves in
accordance with the chapter Accessories."
Fittin
g
ele
c
tri
c
c
omponent
s
S
Connect the electric control elements (in
accordance with the relevant operating
instructions).
Connect the motor with the controller
(Z) and via an intermediately switched
amplifier with the mains voltage.
Fig.31
Fig.32
Fig.33
X
Z
M
