Festo DGC G Series, Repair Instructions

Page: 41 / 136

41 / 48 Festo 07DGC-Ga_en
Apply Loctite 243 to the socket head screws and tighten them using the •
appropriate torque (see table).
Type Torque
DGC-50-…-G 25 Nm ±20%
DGC-63-…-G 30 Nm ±20%
Insert the blanking plugs for the drill holes for the socket head screws, •
threaded pins and spring pins into the slide-piston connection.
Note
Once the linear drive has been assembled, it needs to be commissioned as
described in chapter 7 of the operating instructions.
Replacing the slide elements in the slide 4.3.3
Remove the slide as described in • chapter 4.3.1.
Lever the slide elements inwards and out of the slide with a suitable tool. •
Insert the new slide elements in the slide. •