Festo DGC G Series, Repair Instructions

Page: 105 / 136

13 / 44 Festo 7DGC-KFa_en
Entry Designation Type Note
DGC-32-…-KF DGC-40-…-KF DGC-32-…-KF DGC-40-…-KF
1 Self-tapping screw M8×45-10.9 Tightening torque 30 Nm ± 10%, use LOCTITE 243
2 Threaded pin – – – –
3 End cap, left
4 Plug screw – Tightening torque 11 Nm Tightening torque 16 Nm ± 10%
5 Sealing ring – –
6 Silencer Tightening torque 20 Nm ± 20% Tightening torque 35 Nm ± 20%
7 Shock absorber
8 Shock absorber
9 Seal
10 Sealing ring
11 Flat-head screw DIN 84-
M3×30-5.8 DIN 912-
M4×40-10.9 Tightening torque 0.4 Nm ± 10%,
use LOCTITE 243 Tightening torque 1.0 Nm ± 10%,
use LOCTITE 243
12 Buffer, left
13 O-ring 1.8×1.2-N-
NBR70 3×1.2-N-
NBR75
14 Regulating screw
15 Clamp, sealing band
16 Clamp, cover band
17 Buffer/piston seal
18 Buffer, left, sub-assembly
19 Cover band
20 Sealing band
21 Cylinder barrel with slide
23 Washer
24 Coupling
25 Socket head screw DIN 6912
M5×12-8.8 DIN 912
M5×16-10.9
26 Socket head screw DIN 912
M5×40-10.9
27 Slide-piston connection
28 Spring
29 Cover
30 Buffer/piston seal
31 Magnet
32 Piston
33 Band reverser
34 Piston module
35 Buffer, right
36 Buffer, right, sub-assembly
38 End cap, right