Festo DGC G Series Repair Instructions Download Page 72

Page: 72 / 136

24 / 44

Festo 7DGC-GFa_en

Replacing the slide elements in the slide

4.1.3

If the slide elements in the slide are faulty or worn, they will have to be replaced.

Remove the slide as described in

•

chapter 4.1.1.

Remove the slide elements from the slide.

•

Unfasten the socket head screws on the top of the slide and remove them.

•

Remove both washers from the top of the slide.

•

Note

The washers can be removed easily with the help of a small magnet.

Remove the pressure piece from the slide.

•

Unscrew both regulating screws a few turns.

•

Insert the pressure piece and the new slide elements in the slide and push

•

the slide onto the guide rail.

Note

After replacing the slide elements, the sliding play has to be set as described
in chapter 4.1.4.

Summary of Contents for DGC G Series









































































































































Search results

Summary of Contents for DGC G Series

Reviews:

Related manuals for DGC G Series

Brands by name

Popular brands

Festo DGC G Series, Repair Instructions

Search results

Summary of Contents for DGC G Series

Reviews:

Related manuals for DGC G Series

Brands by name

Popular brands