Festo DGC G Series, Repair Instructions

Page: 25 / 136

25 / 48 Festo 07DGC-Ga_en
Linear drives DGC-18/25/32/40-…-G 4.2
Dismantling the linear drive 4.2.1
Place the linear drive on the work surface with the slide facing upwards. •
Unfasten and remove the three self-tapping screws on both end caps. •
Note
The basic principle of self-tapping screws means they have a high level of
holding force in the thread and require greater force when unfastening them.
Remove the end caps from the cylinder barrel at both ends of the drive. •
Remove the sealing rings from the inside of the end caps and the buffers. •
Documents
Chapters 4.2.4 and 4.2.5 describe how to dismantle and repair the end caps.
Unscrew and remove the flat head screw from the band clamping mecha- •
nism on both buffers.
Remove the clamping mechanism for the cover band from both ends of the •
drive and remove the clamping mechanism from the sealing band between
the cover band and sealing band.