Festo CPX-FB38, Electronic Manual

Page: 24 / 120

1. Installation
1−8
Festo P.BE−CPX−FB38−EN en 0804NH
1.2.2 Setting the DIL switches
You can set the following parameters with the DIL switches
under the cover (see Fig.1/3):
bus node operating mode
diagnostic mode.
Proceed as follows:
1. Switch off the power supply.
2. Remove the cover (see section 1.2.1).
3. Make the required settings (see Tab.1/1 and Tab.1/2).
4. Replace the cover (see section 1.2.1).
1
DIL switch 1:
bus node operating
mode
2
DIL switch 2:
for Remote I/O
operating mode:
Diagnostic mode
1 2
Fig.1/3: Settings of the DIL switches on the bus node