Festo CPX-FB38, Electronic Manual

Page: 15 / 120

Contents and general instructions
XIII
Festo P.BE−CPX−FB38−EN en 0804NH
The following product−specific terms and abbreviations are
used in this manual:
Term/abbreviation Meaning
A0
h
Hexadecimal numbers are marked by a low−set h"
AB Output byte
Bus nodes Create the connection to certain networks or field busses, pass on control
signals to the connected modules and monitor their functioning
CP Compact Performance
CPX terminal Complete system consisting of CPX modules with or without pneumatics
CPX modules Common term for the various modules which can be incorporated in a CPX
terminal
DIL switches Miniature switch; dual−in−line switches consist of several switch elements
with which settings can be made
FEC Front End Controller, e.g. CPX−FEC, can be installed as:
independent system controller (PLC, Stand Alone operating mode)
system controller (PLC, Stand Alone operating mode)
field bus slave (Remote I/O operating mode)
FMT Festo Maintenance Tool (CPX−FMT); configuration and programming
software for CPX modules for start−up and service purposes
Handheld control unit
(MMI) Manual control unit (handheld control unit, CPX−MMI) for CPX modules for
start−up and service purposes (Man−Machine Interface, MMI)
I Digital input
IB Input byte
I/O modules Collective term for the CPX modules which provide digital inputs and
outputs
I/Os Digital inputs and outputs
O Digital output
Octet Number of address words assigned by the CPX terminal
Tab.0/2: Specific terms and abbreviations part 1