Festo CPX-FB38, Electronic Manual

Page: 84 / 120

2. Commissioning
2−48
Festo P.BE−CPX−FB38−EN en 0804NH
Behaviour of the outputs in the Fail safe mode
(parameterisation)
In the Fail safe mode, output channels can assume one of the
following states:
Digital outputs/valves Analogue outputs
Maintaining the current
condition (freeze" signal) Maintaining the current
condition (freeze" signal)
Resetting the output channel
(factory setting) Resetting of the output channel
to the analogue value 0
(factorysetting)
Setting the output signal Setting the required analogue
value (output signal)
Tab.2/16: Possible states of the output channels in the
Failsafe mode
If necessary, parameterise the required state of individual or
all output channels (outputs or solenoid coils or valves).
The status is set with the channel−specific module parameters
Faul mode" and Fault state".
In doing so, make sure that you assign the suitable setting to
each output.
Further information: see CPX system manual P.BE−CPX−SYS−...