Festo CPX-FB38, Electronic Manual

Page: 42 / 120

2. Commissioning
2−6
Festo P.BE−CPX−FB38−EN en 0804NH
Electric modules Module type Module
id
tifi
1)
Assigned address space
Description
identifier
1)
Inputs Outputs
Bus node for EtherCAT
in operating mode
Remote I/O
2)
without diagnostics access
CPX−FB38 FB38−RIO...
Bus node for EtherCAT
in operating mode
Remote I/O
2)
with status bits [Status]
CPX−FB38 FB38−RIO... 2 bytes/
8 (16) I
3)
(8 bits used)
Bus node for EtherCAT
in operating mode
Remote I/O
2)
with I/O diagnostic interface
[System Table Interface, STI]
CPX−FB38 FB38−RIO... 2 bytes/16 I 2 bytes/16 O
Digital 4−input module CPX−4DE 4DI 1 byte/
4 (8) I
3)
Digital 8−input module CPX−8DE 8DI 1 byte/8 I
Digital 8−input module
with channel diagnosis CPX−8DE−D 8DI−D 1 byte/8 I
Digital 8−input module,
n−switching CPX−8NDE 8NDI 1 byte/8 I
Digital 16−input module CPX−16DE 16DI 2 bytes/16 I
Digital 16−input module
with channel diagnosis CPX−M−16DE−D 16DI−D 2 bytes/16 I
Digital 4−output module CPX−4DA 4DO 1 byte/
4 (8) O
3)
Digital 8−output module CPX−8DA 8DO 1 byte/8 O
Digital 8−output high current
outputmodule CPX−8DA−H 8DO−H 1 byte/8 O
1)
Module identifier in the handheld unit or in the hardware config. of the programming software.
2)
Number of occupied I/O bytes in the Remote Controller operating mode: see Tab.2/3
3)
Diagnostic mode status bits assigned 8 I or 2 bytes of address space (8 I or 8 bits remain unused);
4−way modules CPX−4DE and CPX−4DA always occupy 8 I or 8 O or 1 byte of address space
(4 I/O or 8 bits of address space remain unused)
Tab.2/1: Address assignment of electric CPX modules
(overview; bus node in Remote I/O operating mode) part 1