3
Mounting and installation
14
Festo – P.BE-CPX-FB37-EN – 1406NH – English
3.1.2
Mounting the bus node
Note
Damage to the interlinking block
•
Always use the correct screws for the interlocking block, which depend on whether
the block is made of metal or plastic:
–
For
plastic
interlinking blocks: Self-tapping screws
–
For
metal
interlinking blocks: Screws with metric thread
Both types of screws are enclosed when the bus node is ordered as a single part.
1. Check the seal and the sealing surfaces. Replace the damaged parts.
2. Insert the bus node into the interlinking block as far as possible without tilting it.
3. Turn the screws into the existing thread.
4. Tighten the screws in diagonally opposite sequence. Tightening torque: 0.9 … 1.1 Nm.
