A
Technical appendix
Festo – P.BE-CPX-FB37-EN – 1406NH – English
77
A
Technical appendix
A.1
Technical data
General
General technical data
CPX system description P.BE-CPX-SYS-...
Degree of protection through housing
1)
in accordance with IEC/EN 60529, completely
mounted, plug connector inserted or provided with
cover cap
IP65/IP67
Protection against electric shock
Protection against direct and indirect contact as
per IEC/DIN 60204-1
through the use of PELV circuits
(Protected Extra Low Voltage)
Module code (CPX-specific)
–
Remote I/O
224/2
–
Remote controller
171/2
Module code (in operator unit MMI)
–
Remote I/O
FB37-RIO EtherCAT remote I/O
–
Remote controller
FB37-RC EtherCAT remote controller
1)
Note that connected devices might only satisfy a lower degree of protection, a smaller temperature range, etc.
Tab. A.1
Technical data, general
Power supply
Bus node intrinsic current consumption
from operating voltage supply for electronics/
sensors (U
EL/SEN
)
typically 100 mA at 24 V (internal electronics)
Separation
EtherCAT interfaces for U
EL/SEN
galvanically separated
Tab. A.2
Technical data: Voltage supply
