4
Commissioning
34
Festo – P.BE-CPX-FB37-EN – 1406NH – English
Module designation
1)
CPX diagnostics
Operating mode
FB37-RC [16 bytes IO]
Remote controller
16 byte I/16 byte O for
communication of the bus
node with the CPX-FEC or
CPX-CEC
–
1)
Module designation in the configuration and programming software
Tab. 4.3
Diagnostics settings
Note
The setting of DIL switch 2 must correspond to the diagnostics mode selected here
(
Section 3.2.6).
Additional information on CPX diagnostics can be found in the CPX system description
(P.BE-CPX-SYS-...).
In the illustration below (
Fig. 4.6) the bus node is added to slot 1 in the Remote I/O mode without
CPX diagnostics (view in TwinCAT 3.x).
Fig. 4.6
Bus node in Remote I/O mode, without CPX diagnostics
