Festo CPV...-GE-CO3-8 series, Electronic Manual

Page: 101 / 143

A. Technical appendix and accessories
A-3
Festo P.BE-CPV-CO3-EN en 1201a
A.1 Technical specifications
General information
Temperature range
– Operation
– Storage/transport -5 … +50 °C
-20 … +70 °C
Relative air humidity
95 %, non-condensing
Protection class as per EN 60529
(plug connector inserted or provided with
protective cap)
– IP65 with Sub-D connector or M12 adapter
– IP20 with screw terminal adapter
Protection against electric shock
(protection against direct and indirect contact
as per IEC/DIN EN 60204-1)
by means of a PELV circuit
(Protective Extra-Low Voltage)
Electromagnetic compatibility
EMC interference emission
EMC resistance to interference see declaration of conformity
www.festo.com
Vibration and shock
– Vibration
– Shock
– tested as per DIN/IEC 68/EN 60068 part 2-6;
for wall mounting:
0.35 mm path at 10 … 60 Hz,
5 g acceleration at 60 … 150 Hz
– tested as per DIN/IEC 68/EN 60068 part 2-27;
for wall mounting:
±30 g at 11 ms duration; 15 cycles
Pneumatic valves see Pneumatics manual type P.BE-CPV-...
Operating voltage for bus interface and logic
Pin 1
Operating voltage connection
– Nominal value
– Tolerance
24 V DC (protected against reverse polarity)
20.4 … 26.4 V
Current consumption
– Nominal value max. 200 mA + current consumption of the sensors
Residual ripple 4 Vpp (within tolerance)
Electrical isolation bus interface opto-decoupled