Accompany the buckle
(B)
back to its rest position.
Pretensioners
This device consists of a retractor with a pyrotechnic pretensioner. The pyrotechnic system is integrated in a
single component with the retractor.
This device maximises the protective action of the seat belt.
The pretensioner is activated by the airbag control ECU in the event of a frontal collision (direction of impact
between 11 a.m. and 1 p.m.) of excessive severity, or in the event of lateral collision of sufficient severity.
The seat belt is rewound by a few centimetres immediately before the restraining action begins, taking up
any slack between the belt and the body of the occupant.
Effective activation of the pretensioner is indicated by the light on the instrument panel and by the tightening of
the belt.
Pretensioner activation releases a small quantity of powder. This powder is harmless and is not an indication of
fire.
Pretensioner activation depends only on the state of the seat belt and is not influenced by the presence of the
occupant.
If the belt is not buckled, the pretensioner is not activated even if the seat is occupied.
The seat belt is equipped with a load limiter to reduce the restraint force exerted by the belt on the body of the
occupant in the event of a collision. This device controls the force with which the seat belt is rewound during
a collision.
Operation
Page 3 of 6
Seat belts
8/5/2011
https://modiscs.ferrari.it/KnowledgeOnline/index.php?action=mo&link=link::SM_SM_F40...
Summary of Contents for 458 Italia
