UP TO Ass.ly No. 90801
The pipe connections are protected by a section of
sheath fastened with a clamp. Cut the clamp and
move the section of sheath in order to
disconnect the pipes.
Both open ends must be adequately plugged
immediately after disconnecting pipes.
Undo the AC unions
(78)
and the power steering
system unions
(77)
.
Disconnect the brake servo vacuum system quick
coupling
(76)
.
Remove the clamp
(75)
and disconnect the water
pipe leading to the recirculation pump.
Undo the unions
(74)
for the brake fluid pipes
leading to the rear callipers.
FROM Ass.ly No. 90802 _ rear of vehicle
Both open ends must be adequately plugged
immediately after disconnecting pipes.
Open the clamps indicated.
Release the pipes from the relative clamps.
Remove the clamp
(94)
on the power steering
system pipe.
Disconnect the quick coupling
(93)
on the AC pipe.
Disconnect the quick coupling
(77)
on the power
steering system pipe.
Undo the union
(78)
on the AC pipe.
FROM Ass.ly No. 90802 _ rear of vehicle
Undo the union
(74)
on the brake fluid pipe leading
to the rear calliper.
Page 18 of 58
Rear removable engine-gearbox assembly mounting subframe
8/5/2011
https://modiscs.ferrari.it/KnowledgeOnline/index.php?action=mo&link=link::SM_SM_E20...
Summary of Contents for 458 Italia
