Ferrari 458 Italia, Technical Documentation Manual

Page: 1100 / 2012

Apply adhesive primer in a uniform,
uninterrupted bead.
Using an extrusion gun fitted with a triangular
section nozzle, apply a continuous bead (4) of
BETASEAL 1703 code 64954900 over the
primer applied previously, starting from the mid
point of the bottom edge.
At the bottom and top edges of the glass, the
sealant must be applied inside the seals.
The end of the bead must overlap the beginning
by approximately 20-30 mm .
Check that there are no bubbles or interruptions in
the bead; if necessary, correct with additional
sealant.
The fitting of the windscreen on the bodyshell must take place with no possibility of delay within 5 minutes
from the application of the adhesive tape.
Hold the engine compartment lid glass parallel to the mating surface and fit onto the bodyshell.
Press along the entire perimeter of the engine compartment lid window.
Check that the gap, along the whole length of the
indicated sections, between bodyshell and
engine compartment glass corresponds to the
values shown in the photo aside.
Page 10 of 11 Engine compartment lid
8/5/2011 https://modiscs.ferrari.it/KnowledgeOnline/index.php?action=mo&link=link::SM_SM_E30...