Ferrari electronic OfficeMaster Gate, User Manual

Page: 28 / 108

22 www.ferrari-electronic.de
Configuration
Notee!
▼
This only works in Point-to-Point mode. Common terminals will not be usable on
this line as such devices usually run in Point-to-Multi point mode. Additionally,
a cross cable needs to be used for the connection with the PBX.
►
[...]-Button – Advanced Connection Parameter
► Dial Timeout
When simulating an external line, numbers of any random length will be communicated by the telephone
system. In order to decide, which calls are supposed to be redirected outward, a timeout is set, after which
no more digits are to be expected. This timeout usually happens after 3-5 seconds.
► Caller Name Display Mode
Is QSIG activated in the ISDN protocol, caller names can be transmitted for incoming and outgoing calls.
Since this is based on different protocol versions depending on the system, testing is the only way to find
the right setting.
► No L2 auto-activation (Point-to-Point Options)
With a Point-to-Point connection, the gateway will try to keep active the layers 1 and 2 in the D-Channel at
all times. This behavior can be deactivated here.
►
ISDN Type of Number, Mapping from/to E.164
Type of Number
is usually defined in ISDN in order to define information about the type of call. Internally (for
example Lync or OfficeMaster Suite) calls are usually in E.164 format, meaning that they need to be adjusted
properly.
► International
With calls from ISDN, the configured „call number“ (for example „+“) is fronted when the
Type of Number
(TON) is set to „international“.
For outbound calls, meaning to ISDN, the TON is recognized via the configured call number and the call
number removed.
►
National
National numbers are treated equivalently to international numbers.
► Subscriber
The local connection is entered under
Subscriber
.
► Apply to
Insert here, for which numbers the adaptations are to be made.