Ferrari electronic OfficeMaster Gate User Manual Download Page 66

Page: 66 / 108

www.ferrari-electronic.de

Configuration

1. The Gateway is set up behind the PBX - for this, additional ISDN ports as well as changes to the PBX are

required.

2. Installation of the Gateway between the Trunk and the PBX („Drop & Insert“) - no changes need to be made

on the PBX. Also enables the automatic distribution of incoming calls to Lync resp. PBX (requires additional
Windows Software to automatically recognize migrated users).

In order to enable communication between all users, six different paths need to be configured.

3.5.1 Inbound routing, Trunk->OMG->PBX

Connection to the Trunk

An interface of OfficeMaster Gate is connected with the Trunk. This Interface has to be run in TE mode. These

are the standard settings for ISDN interfaces with OfficeMaster Gate.

Image 3.57: Running the interface to the Trunk in TE mode

Summary of Contents for OfficeMaster Gate













































































































Search results

Summary of Contents for OfficeMaster Gate

Reviews:

Related manuals for OfficeMaster Gate

Brands by name

Popular brands

Ferrari electronic OfficeMaster Gate, User Manual

Search results

Summary of Contents for OfficeMaster Gate

Reviews:

Related manuals for OfficeMaster Gate

Brands by name

Popular brands