Ferrari electronic OfficeMaster Gate, User Manual

Page: 20 / 108

14 www.ferrari-electronic.com
Installation
Notee!
▼
When a SBA is shipped, the serial number of the embedded gateway board is al-
ready preconfigured. After using the recovery image, the gateway serial number
will be queried later by the Web UI during deployment. The serial number of
the gateway board can be found on a card, which can be pulled out at the front
side:
Image 2.6: In this example the number to be entered is 259 (last 5 digits without leading zeros). (On some models, the number may be hand-
written and may contain the serial number only, without the prefix, e.g. 234).
Check of the network interface configuration
During deployment of the Windows image via USB stick, the desired network configuration is automatically
established:
Image 2.7: Network bridge on the SBA