Ferrari electronic OfficeMaster Gate, User Manual

Page: 33 / 108

27 www.ferrari-electronic.de
Configuration
► Fax CSID
Here, a separate fax ID can be declared, in which by referencing to the Called Party Number, the user dial
through number could be displayed individually.
►
Destination
Multiple destinations are possible destinations for incoming calls.
► Mode
The mode for a connection to Exchange UM or Lync/Office Communication Server should be SIP. Shall
a call (fax, SMS, voice mail) be handled by the OfficeMaster Messaging Server, OfficeMaster has to be
chosen. Further modes are ISDN (for when a call shall be directed via ISDN once again) as well as REGIS -
TERED (the call is redirected to a SIP installation, as long as that installation is registered under the number
accompanied by the call).
► Host
For SIP mode you must specify the target computer either by entering its IP address or a fully qualified host
name.
► Protocol
The protocol used for the targets described here is either TCP or TLS. UDP is for example often used in
combination with analog adapters.
► Port
Typical values for the target port: Exchange/TCP 5060, Exchange/TLS 5061, Lync/TCP 5068 and Lync/
TLS 5067. With Lync Servers, the actual value can be seen in the Topology Builder in the section Mediation
Pool.
► Add. Parameters
This is where you make additional settings. This field usually remains empty. You should only use it on the
advice of the Ferrari electronic hotline.
► Multiple Destinations
In SIP mode you can specify more than one target so that, for example, if a computer crashes, any inbound
calls can be forwarded to another computer. If you click the „Multiple Destinations“ check box, the dialog
changes.
In OfficeMaster mode, additional priorities can be set. Destinations with equal priority trigger an automatic
divide onto those destinations.