FENIX IMVICO
TK23 OPERATION MANUAL
47/81
ESC 3 n
[Name]
Set line spacing
[Format]
ASCII
ESC 3
n
Hex
1B
33
n
Decimal 27 51
n
[Range] <00>H
≤
n
≤
<FF>H
[Description] Sets the line spacing to
[n
x 0.125 mm].
[Default]
n
= <1E>H
[Reference]
ESC 2
ESC @
[Name] Initialise
printer
[Format] ASCII
ESC
@
Hex
1B
40
Decimal 27 64
[Description] Clears the data in the print buffer and resets the printer settings to the
settings that were in effect when the power was turned on.
[Notes]
•
The data in the receiver buffer is not cleared.
ESC J n
[Name]
Print and feed paper
[Format]
ASCII
ESC J
n
Hex
1B 4A
n
Decimal 27 74
n
[Range]
<00>H
≤
n
≤
<FF>H
[Description] Prints the data in the print buffer and feeds the paper
[n
x 0.125 mm
(0.0049”)].
[Notes]
•
After printing is completed, this command sets the print starting position to the
beginning of the line.
•
The paper feed amount set by this command does not affect the values set by
ESC 2
or
ESC 3
.
•
The printer uses the vertical motion unit
(
y).
