FENIX IMVICO
TK23 OPERATION MANUAL
48/81
ESC M n
[Name]
Select character font
[Format]
ASCII
ESC M
n
Hex
1B
4D
n
Decimal 27 77
n
[Range]
n
= <00>H, <01>H
[Description] Selects the character font.
n
Function
<00>H
Character Font A (12 x 24) selected
<01>H
Character Font B (8 x 16) selected
[Notes]
•
ESC !
can also select character font types. However the setting of the last
received command is effective.
•
This command must be sent at the beginning of a line. If it is sent in the middle
of a line, all previous data in the print buffer is printed and the ticket is placed
at the beginning of the next line.
[Reference]
ESC !, APPENDIX A
ESC c 5 n
[Name]
Enable/disable panel buttons
[Format]
ASCII
ESC c
5
n
Hex
1B 63 35
n
Decimal 27 99 53
n
[Range]
0
≤
n
≤
255
[Description] Enables or disables the panel buttons.
•
When the LSB of
n
is 0, the panel buttons are enabled.
•
When the LSB of
n
is 1, the panel buttons are disabled.
[Notes]
•
Only the lowest bit of
n
is valid.
•
When the panel buttons are disabled, none of them are usable.
•
In this printer, the only panel buttons is the FEED button.
[Default]
n
= 0
ESC d n
[Name]
Print and feed
n
lines
[Format] ASCII
ESC
d
n
Hex
1B 64
n
Decimal 27 100
n
[Range]
<00>H
≤
n
≤
<FF>H
[Description] Prints the data in the print buffer and feeds
n
character lines.
[Notes]
•
This command sets the print starting position to the beginning of the line.
•
This command does not affect the line spacing set by
ESC 2
or
ESC 3
.
