FENIX IMVICO
TK23 OPERATION MANUAL
14/81
For these reasons, FENIX suggests the following systems as solutions to a correct
installation:
2.2.1- EXTERNAL CHUTE SYSTEM
The idea of this system is to internally print and cut the ticket inside the machine, and
then make it fall into a receptacle where the user can have external access. Therefore,
there must exist some distance between the printer and the front side of the user’s
chassis in order to build a useful chute for the ticket, and to be able to open the printer
thermal head.
Two points must be assured to make this system work right:
•
The construction of the receptacle must avoid the user to reach any internal
parts of the machine.
•
The way of the ticket from the printer outlet to the receptacle must be smooth,
clean and free of obstacles to allow the ticket to actually fall into it and avoid
paper jams or tickets that do not fall. Depending on the construction materials,
care must be taken with static electricity; otherwise tickets may get stuck
inside the machine and never reach the receptacle.
Next figure shows a scheme of this system:
Fig. 2.3
-
External chute system.
Frontal side of
user’s chassis
Ticket
receptacle
Ticket
Make sure this distance allows the
opening of the printer thermal
head (min: 20mm)
