Felston HD940 Owner'S Manual Download Page 44

Page: 44 / 44

Specifications

Audio Delay Capabilities

•

0 to between 340 ms and 999 ms, in 1 ms or 0.33 ms steps.
Maximum delay is dependent on the audio format of the HDMI
signal, but is always at least 340 ms.

•

32 user-programmable presets (8 per input)

Digital Audio Signal Compatibility

The HD940 preserves digital audio integrity

bit-for-bit,

ensuring

compatibility with all current HDMI audio formats.

List formats we have tested with along with notes on maximum delay?

Connections

•

4 x HDMI Inputs

•

1 x HDMI Output

•

DC power supply socket

Power Requirements

5V DC (+ve center), 2A

Refer to the specifications printed on the power adaptor supplied with
HD940 for AC power requirements.

Power Consumption

Less than ?? Watts for the HD940 from 5V DC

AC power consumption will depend upon the country specific power
adaptor supplied with the unit but will not exceed 5 watts in any case.

Dimensions of Main Unit (WxDxH)

Size:

7.9” (200mm) x 4.1” (104mm) x 1.2” (30mm)

Weight: 1lb 5oz (600g) approx.

Summary of Contents for HD940













































Search results

Summary of Contents for HD940

Reviews:

Related manuals for HD940

Brands by name

Popular brands

Felston HD940, Owner'S Manual

Search results

Summary of Contents for HD940

Reviews:

Related manuals for HD940

Brands by name

Popular brands