Control Head Legends and Safety Messages
51
Installation and Maintenance Instructions
Federal Signal www.fedsig.com
Control Head Legends and Safety Messages
To complete the installation, the SmartSiren kit includes:
• A scored sheet of replaceable keyhead legends that identify the functions
of the control head buttons (part no. 181460). Before installing the legends,
configure the operation of the control head with the Convergence
Configuration Software (see the Convergence Network Software Configuration
Manual, part no. 2562418).
• A scored sheet of two labels with precautions to guard against hearing loss
when operating the siren amplifier/relay module (part no. 1612339).
• A safety message card for operators of Federal Signal Sound and Light System
(part no. 256B691).
Applying the Replaceable Control Head Legends
To apply the legends:
1. Peel the appropriate legends from the sheet and apply them to the control
head in the areas shown in Figure 35.
2. Verify that the label is properly tucked under the retaining ridge on the button.
Figure 35 Installing the control head labels
DOOR
AREA
P
AUX 1
WAIL
WAIL
DOM
AUX 2
A / H
AU
Y
RIGHT
ALLEY
E
290A6323
MAN
Legend Sticker
Removed from
Adhesive Sheet
Adhesive Sheet
Blank Buttons
Inserted Legends
Control Pad
Distributing the Safety Message Card
Give the operator of the system the card entitled “Safety Message to Operators of
Federal Signal Light/Sound Systems” (part no. 256B691). See Figure 36 on page
52. The operator must read and understand the safety instructions and keep the
card in the vehicle for reference.
