An Overview of the SmartSiren Platinum
13
Installation and Maintenance Instructions
Federal Signal www.fedsig.com
Table 2 Siren Specifications
Speakers
SSP2000B: one 100 W, 11-ohm speaker
SSP3000B: one or two 100 W, 11-ohm speakers
Operating Current (no lamps on) 9 A (nominal), (13.6 V battery, 11-ohm load at high
power)
Frequency Range
725 to 1 600 Hz
Nominal Cycle Rate
Wail: 12 cycles per minute
Yelp: 180 cycles per minute
Priority: 370 cycles per minute
High-Low: 60 cycles per minute
Nominal Voltage Output
64 V peak-to-peak (siren tones)
Audio Response
300 Hz to 3,000 Hz ± 3 dB
Audio Power
45 W in PA Mode (typical with 1.4 V peak-to-peak input)
Harmonic Distortion
Less than 10 percent from 5 to 45 W
Input Impedance (PA)
4,000 ohms (nominal)
Siren Tone Compliances
SAE J1849 JUL89
Table 3 SignalMaster Specifications (Model SSP3000B only)
Fuse
20 A (halogen or LED)
Output Drive Capability (Total)
Eight lamps at 27 W each
Normal Flash Rate
Directional and Warn
Approximately 35 patterns per minute
Fast Flash Rate
Directional and Warn
Approximately 45 patterns per minute
Table 4 Relay Specifications
Model SSP3000B Fuse Capability
AUX 1 to 8: 10 A (high)
AUX 9 and 10: 10 A (high-low)
AUX 11 to 14: 2 A high
Model SSP2000B Fuse Capability
AUX 1 to 6: 10 A (high)
AUX 10: 10 A (high-low)
AUX 11 to 14: 2 A (high)
Flash Rates
75 flashes per minute
90 flashes per minute
120 flashes per minute
200 flashes per minute
300 flashes per minute
