Setting Control Head Options
43
Installation and Maintenance Instructions
Federal Signal www.fedsig.com
Figure 25 LEDs and buttons associated with Program Mode settings
“Keep alive” timeout menu
Indicates that the Ethernet is on for system configuration and the control pad is in
Program Mode. (See the Configuration Software Manual P/N 2562418.)
Indicates that the control pad is ready to be reset to the factory default configuration
Indicates the button LEDs are selected for DIM or OFF
Indicates that the Park Disable circuit is selected for active high
(ON) or active low (OFF) activation
Indicates that the 10-second beep that is
audible in Program Mode is selected for
ON or OFF
Exits Program Mode
6
9 10
6
7
8
9
10
12
13
Indicates that the Horn Ring circuit is selected for
active high (ON) or active low (OFF) activation
Selecting Active-High Activation of Horn-Ring Transfer
For instructions on connecting the horn-ring circuit for siren-tone control, see
““Horn Ring Transfer (Cable Assembly 17500307)” on page 29.
The default setting is active-low.
To select active-high activation of the Park Input feature:
1. While in Program Mode, press Button 10. LED 10 in Figure 25 turns on.
2. To continue, select another setting to change or press Button 13 to exit Program
Mode. Verify that the last amber LED turns on when you exit.
