118
Programming PABX Interface
PAGASYS GEN II (P-SYS-G)
Federal Signal www.fedsig.com
• Click Update to save the broadcast.
4. Select the new broadcast you created, and then click the + Add new record button
under the Primary Sequence section to select a source for the broadcast. The New
Primary Sequence dialog box appears.
5. Select source Pabx Recording, with appropriate scope. Set Duration in Ms, Next
Slice ID, and set Widget to same value as Broadcast ID.
6. Click Update to save Primary Sequence #1.
15.2 Configuring the Miscellaneous Card
To configure the Miscellaneous card to enable connection to PABX system, including
programming telephone and answering settings using the System Manager software.
1. Select Configuration > Equipment > Misc Card.
2. Configure Telephone Settings.
• Set line mode, typically Analog Extension. (See the next section.)
• Set Welcome Prompt to an available broadcast message.
• Set Message Broadcast to an available broadcast message.
• Set Maximum Page Duration, Max Playback Waiting Periods, and Trim Message
Ending to desired values (for example, 60/120/100 seconds).