46
I/O and Terminal Block Cards
PAGASYS GEN II (P-SYS-G)
Federal Signal www.fedsig.com
Figure 23 Beacon Monitored Output Module (P-BK-MON-G)
3.3.1 Beacon Monitored Module Specifications (P-BK-MON-G)
Table 29 Environmental and Physical for the Beacon Monitored Module (P-BK-
MON-G)
Operating Temperature
-25 to +55
°
C
Humidity
0-98% non-condensing
P-BK-MON-G Dimensions (H x W x L)
94 mm x 200 mm x 122 mm
Weight
0.91 kg/2.00 lb
3.4 Relay Output Card (P-SPDT-G)
The Relay Output card (P-SPDT-G) is one of several I/O boards designed specifically for
integration into the PAGASYS GEN II system. (See Figure 24.) These I/O boards use a
standard control interface, which greatly simplifies the internal wiring of the cabinets.
The Relay Output card provides 12 single-pole, double-throw (SPDT) voltage-free relay
contacts for connection to external equipment or for use within the local cabinet such as
speaker circuit muting.
The Relay Output card provides status LEDs for the following:
• A green Power LED to indicate that the I/O Bus 24 Vdc supply is being applied to
the card.
• A green 5 V LED to indicate that on board +5 Vdc switching supply is energized.
• An onboard local microprocessor-controlled status LED to indicate the following.
State
Meaning
Off
Microprocessor failure
On
Microprocessor failure
