53
I/O and Terminal Block Cards
Description, Installation, Operations, and Maintenance Manual
Federal Signal www.fedsig.com
Figure 28 Cable Power Injector I/O Card (P-CPIC-G)
3.8.1 Cable Power Injector I/O Card Specifications (P-CPIC-G)
Table 38 Environmental and Physical for the Cable Power Injector I/O Card
(P-CPIC-G)
Operating Temperature
-25 to +55
°
C
Humidity
0-98% non-condensing
P-CPIC-G Dimensions (H x W x L)
20 mm x 200 mm x 79.8 mm
Weight
0.096 kg/ 0.21 lb
3.9 Amplifier Audio Distribution Terminal Block (P-AADCx-G)
The Amplifier Audio Distribution Terminal Block cards (P-AADCx-G) are a range of
passive card assemblies that provide terminal block field terminations for the PAGSYS
GEN II amplifier’s 100 V audio output signals. (See Figures 29-32.)
Amplifier Audio Distribution cards have eight models that vary in the number of
amplifiers supported, the number of speaker loop circuit provided per amplifier and the
type of terminal block contact styles.
Table 39 Amplifier Audio Distribution Cards
Model
Number of amplifier
circuits supported
Speaker loop
circuit per amplifier
Terminal block style
P-AADC1-G
8
1
Cage clamp terminal block
P-AADC1-G-01 8
1
Screw terminal block
P-AADC2-G
4
2
Cage clamp terminal block
P-AADC2-G-01 4
2
Screw terminal block
P-AADC4-G
2
4
Cage clamp terminal block
P-AADC4-G-01 2
4
Screw terminal block
P-AADC8-G
1
8
Cage clamp terminal block
P-AADC8-G-01 1
8
Screw terminal block
The PAGSYS GEN II Amplifier Chassis provides a 16-pin audio power connector for its
four, 100 V audio output signals. Each 100 V audio output signal is provided with four
connector pins within this audio power connector, which enables the Amplifier Chassis to
monitor the integrity of the connected external speaker closed loop circuit.
