51
I/O and Terminal Block Cards
Description, Installation, Operations, and Maintenance Manual
Federal Signal www.fedsig.com
Figure 26 Monitored Input Module (P-MONIC-G)
3.6.1 Monitored Input Module Specifications (P-MONIC-G)
Table 35 Environmental and Physical for the Monitored Input Module (P-MONIC-G)
Operating Temperature
-25 to +55
°
C
Humidity
0-98% non-condensing
P-MONIC-G Dimensions (H x W x L)
60 mm x 200 mm x 122 mm
Weight (with 2000165 daughter card)
0.17 kg/0.38 lb
3.7 Passive Terminal Block Card (P-PTBC-G)
The Passive Terminal Block card (P-PTBC-G) is a passive card that provides four RJ45
to terminal block interfaces. (See Figure 27.) The P-PTBC-G card is primarily intended
to provide the Cabinet with terminal block type field termination for connection to
remote safe area access panels. The PAGASYS GEN II System Controller itself uses
RJ45 connectors for its access panel control interfaces, the P-PTBC-G card converts the
RJ45 interface to terminal block terminals. Use the P-PTBC-G card wherever there is a
requirement to interface between RJ45 cables and terminals blocks.
The Passive Terminal Block card has two models that vary in the type of terminal block
contact styles.
NOTE
: The service model for the Passive Terminal Block card is K-P-PTBC-G.
Table 36 Passive Terminal Block Card Models
Model
Number of Access
panels supported
Access Panel Field
connection Style
P-PTBC-G
4
Cage clamp terminal block
P-PTBC-G-01 4
Screw terminal block
