MSD
TM
Series
© Copyright 2018 Fluid Equipment Development Company | www.fedco-usa.com
-
40
-
Pump Assembly Continued
Figure 72 -
Installing Motor Adapter Bolts
15.
Install the motor adapter bolts, washers
and nuts and tighten to torque specs speci-
fied in the
Fastener Torque Specifications
section of this manual.
Figure 71 -
Precision Leveling Feet Mouting
Bolts
14. Install the precision leveling feet mounting
bolts beginning with the discharge housing
leveling foot and working backwards to
-
wards the motor.
NOTES:
Tighten to torque specs specified in
the
Fastener Torque Specifications
section of
this manual.
Figure 70 -
Discharge Housing Precision
Leveling Foot Jacking Bolts
13.
Correct any uneven gaps that exist be
-
tween the motor and motor adapter by
carefully adjusting the jacking bolts on the
discharge housing precision levelling foot
until both gaps (if any) are equal.
NOTES:
Re-check the inlet precision leveling
foot to make sure the motor adapter is properly
aligned with the motor. If necessary, make any
corrections using the jacking bolts at the inlet
precision leveling foot.