MSD
TM
Series
© Copyright 2018 Fluid Equipment Development Company | www.fedco-usa.com
-
13
-
Installation Procedures Continued
Horizontal Lifting And Handling Continued
CAUTION
Whenever possible, all components should be lifted and moved separately for safety. Do not lift
the pump up by the shaft. If the unit is lifted by the shaft, damage may occur. Lifting and handling
of the motor must be performed according manufacturers instructions. Do not lift the pump and
motor by the motor eyebolt. The eyebolt is used for lifting the motor only.
NOTES:
Do not lift pump and base plate with the motor on the base plate. The pump and base
plate need to be installed and then the motor installed.
NOTES:
The motor and base plate need to be lifted from a combination of lifting points so the
pump and base plates total weight is balanced.
Motor and Pump Assembly Lifting
NO
Figure 11 - Improper Lifting Points Horizontal
Figure 12 -
LIFT POINTS
Figure 13 - Proper Motor and Pump Lifting (Both Sides of Base P
late)