FCA US DODGE JOURNEY 2020 Page 79 Owner'S Manual Download

Page: 79 / 404

GETTING TO KNOW YOUR VEHICLE

Opening Sunroof

Express
Push the switch rearward and release it within

one-half second, the sunroof and sunshade will

open automatically and stop at full open posi-

tion. During Express Open operation any other

actuation of the sunroof switches will stop the

sunroof in a partially open position.
Manual Mode
Push and hold the switch rearward, the sunroof

and sunshade will open and automatically stop

at full open position. Releasing the switch while

the sunroof is in motion will stop the sunroof in

a partially open position.
Vent Open
Push and release the Vent switch within one

half second and the sunroof will open to the

vent position. During Express Vent operation

any other actuation of the sunroof switches will

stop the sunroof operation.

Closing Sunroof

Express
Push the switch forward and release it within

one-half second and the sunroof will close auto-

matically from any position. During Express

Close operation any other actuation of the

sunroof switches will stop the sunroof in a

partially open position.
Manual Mode
Push and hold the switch forward and the

sunroof will close from any position and stop at

a full closed position. Releasing the switch while

the sunroof is in motion will stop the sunroof in

a partially open position.

Wind Buffeting

Wind buffeting can be described as the percep-

tion of pressure on the ears or a helicopter-type

sound in the ears. Your vehicle may exhibit wind

buffeting with the windows down, or the sunroof

(if equipped) in certain open or partially open

positions. This is a normal occurrence and can

be minimized. If the buffeting occurs with the

rear windows open, open the front and rear

windows together to minimize the buffeting. If

the buffeting occurs with the sunroof open,

adjust the sunroof opening to minimize the

buffeting or open any window.

Sunshade Operation

The sunshade can be opened manually.

However, the sunshade will open automatically

as the sunroof opens.

NOTE:

The sunshade cannot be closed if the sunroof is

open.

Anti Pinch Protect Feature

This feature will detect an obstruction in the

opening of the sunroof during Express Close

operation. If an obstruction in the path of the

sunroof is detected, the sunroof will automati-

cally retract. Remove the obstruction if this

occurs. Next, push the switch forward and

release to Express Close.

Sunroof Maintenance

Use only a non-abrasive cleaner and a soft cloth

to clean the glass panel.

Ignition Off Operation

The power sunroof switch will remain active for

up to approximately ten minutes after the igni-

tion is placed in the OFF position. Opening

either front door will cancel this feature.

NOTE:

Ignition Off time is programmable through the

Uconnect System. Refer to “Uconnect Settings/

Customer Programmable Features” in

“Multimedia” for further information.

20_JC_OM_EN_USC_t.book Page 77

Summary of Contents for DODGE JOURNEY 2020





















































































































































































































































































































































































































Search results

Summary of Contents for DODGE JOURNEY 2020

Reviews:

Related manuals for DODGE JOURNEY 2020

Brands by name

Popular brands

FCA US DODGE JOURNEY 2020, Owner'S Manual

Search results

Summary of Contents for DODGE JOURNEY 2020

Reviews:

Related manuals for DODGE JOURNEY 2020

Brands by name

Popular brands