FCA US DODGE JOURNEY 2020 Page 319 Owner'S Manual Download

Page: 319 / 404

MULTIMEDIA

317

Deleting Presets
A Preset can be deleted in the Presets Browse

screen by pressing the Trash Can icon for the

corresponding Preset.

Return to Main Radio Screen
You can return to the Main Radio Screen, by

pressing the X button on the touchscreen when

in the Browse Presets screen.

SiriusXM® Satellite Radio Mode — If

Equipped

SiriusXM® Radio

SiriusXM® Satellite Radio uses direct satel-

lite-to-receiver broadcasting technology to

provide clear, coast-to-coast radio content.

SiriusXM® is a subscription based service.

SiriusXM® Premier has over 160 channels. Get

every channel available on your satellite radio,

and enjoy all you want, all in one place. Hear

commercial-free music plus sports, news, talk

and entertainment.
Get all the premium programming, including

Howard Stern, every NFL® game, Oprah Radio,

every MLB® and NHL® game, every NASCAR®

race, Martha Stewart and more. And get 20+

extra channels, including SiriusXM® Latino,

offering 20 channels of commercial-free music,

news, talk, comedy, sports and more dedicated

to Spanish language programming.
SiriusXM® services require subscriptions, sold

separately after the 12-month trial included

with the new vehicle purchase. If you decide to

continue your service at the end of your trial

subscription, the plan you choose will automat-

ically renew and bill at then-current rates until

you call SiriusXM® at 866-635-2349 to cancel.

See SiriusXM® Customer Agreement for

complete terms for US residents at

www.siri-

usxm.com

, and for Canadian residents at

www.siriusxm.ca

. All fees and programming

subject to change. Our satellite service is avail-

able only to those at least 18 and older in the

48 contiguous USA and D.C. Our Sirius satellite

service is also available in PR (with coverage

limitations). Our Internet radio service is avail-

able throughout our satellite service area and in

XM and all related marks and logos are trade-

marks of SiriusXM® Radio Inc.
This functionality is only available for radios

equipped with a Satellite receiver. To receive

satellite radio, the vehicle needs to be outside

with a clear view to the sky.
If the screen shows Acquiring Signal, you might

have to change the vehicle’s position to receive

a signal. In most cases, the satellite radio does

not receive a signal in underground parking

garages or tunnels.

No Subscription
Radios equipped with a Satellite receiver

require a subscription to the SiriusXM® Service.

When the Radio does not have the necessary

subscription, the Radio is able to receive the

Preview channel only.

Acquiring SiriusXM® Subscription
To activate the SiriusXM® Satellite Radio

subscription, call 800-643-2112 (USA resi-

dents) or 888-534-7474 (Canadian Residents).

20_JC_OM_EN_USC_t.book Page 317

Summary of Contents for DODGE JOURNEY 2020





















































































































































































































































































































































































































Search results

Summary of Contents for DODGE JOURNEY 2020

Reviews:

Related manuals for DODGE JOURNEY 2020

Brands by name

Popular brands

FCA US DODGE JOURNEY 2020, Owner'S Manual

Search results

Summary of Contents for DODGE JOURNEY 2020

Reviews:

Related manuals for DODGE JOURNEY 2020

Brands by name

Popular brands