FCA US DODGE JOURNEY 2020, Owner'S Manual

Page: 153 / 404

SAFETY 151
You can install up to two child seats using the
LATCH system at the same time. If you are
installing three child restraints, you must use
the seat belt to install the center child restraint.
You can use either the LATCH anchors for posi-
tions (1) and (3) or the vehicle’s seat belt for
installing the child seats in the outboard
positions.
Lower Anchors
Options for installing two child seats using the
LATCH anchorages in this vehicle:
1. Right and left outboard seating positions
(1 and 3): Install the child seats in the right
and left outboard seating positions using
lower anchorages A and B, and D and E. Do
not use the center seat anchorage, C. If the
child seats do not block the center seat
belt webbing and buckle, the center seat
belt can be used to restrain an occupant or
child restraint in the center seating
position.
2. Left outboard and center seating positions
(3 and 2): Install the first child seat in the
left outboard seating position using lower
anchorages D and E. Install the second
child seat using the center anchorages, B
and C. Do not use the outer anchorage
closest to the opposite door, A. Do not use
the remaining right outboard seating posi-
tion (1) for any occupant. The center child
restraint will block the seat belt buckle for
this position.
WARNING!

Use anchorages B and C to install a
LATCH-compatible child restraint in the
center seating position (2). Do not install a
LATCH-compatible child restraint using
anchorages C and D. This is not a
LATCH-compatible position in your vehicle.

A child restraint installed in the center posi-
tion (2) will block the seat belt buckle for
the empty right outboard seat behind the
front passenger (1). Do not use this seat for
another occupant.

Never use the same lower anchorage to
attach more than one child restraint.

If you are installing three child restraints
next to each other, you must use the seat
belt and the center tether anchor for the
center position. You can then use either the
LATCH anchors or the vehicle’s seat belt for
installing the child seats in the outboard
positions. Please refer to “To Install the
LATCH-Compatible Child Restraint System”
for typical installation instructions.
4
20_JC_OM_EN_USC_t.book Page 151