FCA US DODGE JOURNEY 2020 Owner'S Manual Download

Page: 61 / 404

GETTING TO KNOW YOUR VEHICLE

Bi-Level Mode

Air comes from both the headliner outlets and the floor outlets.

NOTE:

In many temperature positions, the Bi-Level mode is designed to provide cooler air out of the headliner outlets and warmer

air from the floor outlets.

Floor Mode

Air comes from the floor outlets.

Rear Temperature Control Knob

Turn the rear temperature knob to adjust the temperature. Turn it to the right (clockwise) to raise the temperature. Turn it to

the left (counterclockwise) to lower the temperature. The rear temperature setting is displayed on the control head.
Rear Blower Control Knob

Rear Blower Control regulates the amount of air forced through the rear climate system. There are seven blower speeds

available. The blower speeds can be selected using the blower buttons on the touchscreen.

Rear Climate Control/Blower Off

To turn the Rear Climate Controls off, turn the Blower Control knob to the O (off) position.

Icon

Description

20_JC_OM_EN_USC_t.book Page 59

Summary of Contents for DODGE JOURNEY 2020





















































































































































































































































































































































































































Search results

Summary of Contents for DODGE JOURNEY 2020

Reviews:

Related manuals for DODGE JOURNEY 2020

Brands by name

Popular brands

FCA US DODGE JOURNEY 2020, Owner'S Manual

Search results

Summary of Contents for DODGE JOURNEY 2020

Reviews:

Related manuals for DODGE JOURNEY 2020

Brands by name

Popular brands